2026-11-04 · 5 min read

An AWS designation is only meaningful together with the standard it belongs to. E7018 under A5.1 and ER70S-6 under A5.18 are both carbon steel grades, but they are not comparable documents: one sets requirements for a covered electrode, the other for a bare solid wire. Get the standard wrong and a like-for-like quote stops being like-for-like.

Two things separate the standards. The first is the process the consumable is made for. The second is the base metal family it is intended to join. Both are usually readable from the prefix of the designation.

The four that cover most of the volume

StandardCoversProcessDesignation starts withIn our range
AWS A5.1Covered carbon steel electrodes for manual arc weldingSMAW (stick)EE6010, E6011, E6013, E7016, E7018, E7024
AWS A5.5Covered low-alloy steel electrodes for manual arc weldingSMAW (stick)EE8010, E8018, E9010, E9018
AWS A5.4Covered corrosion-resisting chromium and chromium-nickel steel electrodesSMAW (stick)EE308-16, E308L-16, E316L-16, E410NiMo-16
AWS A5.9Bare stainless steel welding electrodes and rodsGTAW, GMAW, SAWERER308, ER308L, ER316L, ER309L, ER2209

The prefix is the most reliable signal. A designation beginning with E and no R is a covered electrode — it has a coating and it is meant for a stick machine. A designation beginning with ER is a bare rod or wire, and it goes into a TIG torch, a MIG gun or a submerged-arc head.

Why E7018 and E308-16 are not in the same document

Both are covered electrodes, both are used on a stick machine, and they sit on the same shelf. They are in different standards because the base metals are different: E7018 is a carbon steel electrode under A5.1, and E308-16 is a stainless electrode under A5.4. The consequence is practical. A5.1 asks for tensile strength and impact behaviour; A5.4 asks for a deposited chemistry and, for the L grades, a maximum carbon content. They are not interchangeable documents and a certificate against one does not satisfy the other.

The ones outside the four

A catalogue will also carry grades from standards that are not about covered carbon or stainless electrodes, and it helps to recognise them:

  • A5.18 — carbon steel filler metal for gas-shielded arc welding, which is where ER70S-6 comes from.
  • A5.20 — carbon steel flux-cored electrodes, which is where E71T-1C and E71T-GS come from.
  • A5.28 — low-alloy steel filler metal for gas-shielded arc welding, which is where ER90S-B9 comes from.
  • A5.3 — aluminium and aluminium alloy electrodes for manual arc welding, which is where E4043 comes from.
  • A5.12 — tungsten and tungsten alloy electrodes, which is where WT20 and WC20 come from.
  • A5.21 — surfacing consumables, which is where ERCoCr-C comes from.

What this means when you compare two quotes

Two suppliers can both quote "E7018" and deliver different things if one is working to A5.1 and the other to a national equivalent. That is not automatically a problem — the GB, EN and JIS equivalents exist for a reason — but the equivalence has to be stated rather than assumed. When you ask for a quotation from us, name the standard. If you name only the designation, we will ask which standard you are working to, and the certificate will follow the answer.

The same applies in reverse when you receive a mill certificate. The standard is printed on it. Check that it is the one your specification names before you accept the delivery.